Product ID:DIMETHYLPOLYSILOXANES; RTV910
MSDS Date:02/11/1993
FSC:4470
NIIN:01-400-1235
MSDS Number: BZBGB

GE SILICONES

260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: GESIL

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

DOW CORNING 200 FLUID; (DIMETHYLPOLYSILOXANES)

CAS: 63148-62-9

RTECS: JT6484500

Fraction By Weight: 80-99%

OSHA PEL N/K

ACGIH TLV: N/K

<5 (EPA METH. 24) (G/L)

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50: (ORAL, RAT) >40,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE CONTACT:MAY CAUSE MILD EYE
IRRITATION. CHRONIC: THIS PRODUCT OR ONE OF ITS INGREDIENTS PRESENT
0.1% OR MORE IS NOT LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN
BY NTP, IARC, OR OSHA. OTHER :ATTENTION:NOT FOR INJECTION INTO
HUMANS, THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH CAN
GENERATE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:FORMALDEHYDE AT APPROXIMATELY 300
DEGREES FAHRENHEIT (150'C) AND ABOVE, IN ATMOSPHERES WHICH CONTAIN
OXYGEN. FORMALDEHYDE IS A SKIN AND RESPIRATORY SENSITIZER, EYE AND
THROAT IRRITANT, ACUTE TOXICANT, AND POTENTIAL CANCER HAZARDS.AN
MSDS FOR FORMALDEHYDE IS AVAILABLE FROM GE SILICONES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:WASH WITH SOAP AND
WATER. EYES:IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH PLENTY
OF WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL ATTENTION IF
IRRITATION PERSISTS. NOTE TO PHYSICIAN:NONE KNOWN.

Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE KNOWN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE KNOWN. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE KNOWN.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:>400F,>204C
Vapor Density:NONE
Spec Gravity:0.97 (H*2O = 1)
Evaporation Rate & Reference:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR ODORLESS LIQUID
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
FORMALDEHYDE.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. INCINERATION RECOMMENDED IN
APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.